聚酰胺微球的研究进展
|
摘要
本文系统归纳了聚酰胺微球常用的各种制备方法,对各种方法的优缺点进行了评价,重点介绍了本课题组采用反应诱导相反转法制备聚酰胺微球的研究进展。此外,概述了聚酰胺微球在选择性激光烧结(SLS)、吸附等领域的应用,并分析了存在的问题和未来的发展趋势。
In this review, different kinds of methods for preparation of polyamide microspheres have been summarized, and their advantages and disadvantages are evaluated. The recent progress in the preparation of polyamide microspheres by reaction-induced phase reversion, especially in our research group, has been highlighted. Furthermore, we sum up the advancement on the application of the microspheres in Selective-Laser-Sintering(SLS), adsorption and other fields. The existing problems and future development of polyamide microspheres are also analyzed.
In this review, different kinds of methods for preparation of polyamide microspheres have been summarized, and their advantages and disadvantages are evaluated. The recent progress in the preparation of polyamide microspheres by reaction-induced phase reversion, especially in our research group, has been highlighted. Furthermore, we sum up the advancement on the application of the microspheres in Selective-Laser-Sintering(SLS), adsorption and other fields. The existing problems and future development of polyamide microspheres are also analyzed.
引文
[1] Yan C, Shi Y, Yang J, Liu J. J Mater Process Technol, 2009, 209(17): 5785～5792.
[2] Yang J, Shi Y, Yan C. J Appl Polym Sci, 2010, 117(4): 2196～2204.
[3] Kim J, Creasy T S. Polym Test, 2004, 23(6): 629～636.
[4] Linares A, Canalda J C, Cagiao M E, Ezquerra T A. Compos Sci Technol, 2011, 71(10): 1348～1352.
[5] 汤教佳,蕙舒婷,张佩瑶,杨欣爽. 塑料工业,2018, 46(7): 26～31.
[6] Chen Z, Liu C S, Wang Q. Polym Eng Sci, 2001, 41(7): 1187～1195.
[7] Wang G X, Wang P L, Zhen Z C, Zhang W, Ji J H. Mater Des, 2015, 87: 656～662
[8] Wang G X, Liu P, Zhang W, Zhen Z C, Wang X W, Lu B, et al. Express Polym Lett, 2018, 12(1): 13～23.
[9] Hou W H, Lloyd T B. J Appl Polym Sci, 1992, 45(10): 1783～1788.
[10] Hou W H, Lobuglio T M. J Appl Polym Sci, 1994, 54(9): 1363～1369.
[11] 杨旭生,汪艳,陈亚武. 塑料工业, 2018, 46(3): 135～138.
[12] 彭梦飞,汪艳. 工程塑料应用, 2017, 45(3): 50～53.
[13] 谭支林,汪艳. 工程塑料应用, 2018, 46(5): 93～97.
[14] Shi Y S, Zhu W, Yan C Z, Yang J S, Xia Z D. Rapid Prototyping J, 2018, 24(6):1026～1033.
[15] Shahzad K, Deckers J, Boury S, Neirinck B, Kruth J P, Vleugels J. Cera Int, 2012, 38(2):1241～1247.
[16] Md S W, Kenny D, Bob C. J Mech Eng Autom, 2011, 2(5):100～107.
[17] Crespy D, Landfester K. Macromol Chem Phys, 2007, 208(5):457～466.
[18] Cai X X, Wu G Z. Chin J Polym Sci, 2011, 29(5):580～585.
[19] Wu G Z, Cai X X, Lin X J, Yui H. React Funct Polym, 2010, 70(10):732～737.
[20] Dan F, Cleopatra V C. J Appl Polym Sci, 1996, 13(5):67～89.
[21] Cleopatra V C, Dan F. J Appl Polym Sci, 1997, 64(13):2575～2583.
[22] Dan F, Cleopatra V C. Colloid Polym Sci, 1998, 276(6):483～495.
[23] Dan F, Cleopatra V C. J Appl Polym Sci, 1998, 67(2):231～243.
[24] Ricco L, Monticelli O, Russo S, Paglianti A, Mariani A. Macromol Chem Phys, 2002, 203(10): 1436～1444
[25] Dencheva N, Denchev Z, Lanceros-Mendez S, Ezquerra S T. Macromol Mater Eng, 2016, 301(2):119～124.
[26] Oliveira F, Dencheva N, Martins P, Lanceros-Mendez S, Denchev Z. Express Polym Lett, 2016, 10(2):160～175.
[27] Landfester D C. Macromolecules, 2005, 38(16):6882～6887.
[28] Pei A H, Liu A D, Xie T X, Yang G S. Macromolecules, 2006, 12(5):7801～7804.
[29] Wu B Z, Xie T X, Yang G S. Mater Lett, 2011, 65(14):2174～2177.
[30] Wu B Z, Xie T X, Yang G S. Polym Eng Sci, 2012, 52(9):1831～1838.
[31] Liu Y, Xie T X, Yang G S. J Mater Sci, 2011, 46(15):5050～5055.
[32] Kim I G, Kim J E, Liu Y D, Choi H J. IEEE Trans Magn, 2012, 48(11): 3446～3449.
[33] Liu Y, Duan J P, Fu X B, Yang G S. Mater Lett, 2018, 21(4):34～37.
[34] Liu Y, Duan J P, Xia H S, Xu J, Yang G S. Macromol Mater Eng, 2018, 303(5):78～83.
[35] Zhao X K, Xia H S, Fu X B, Duan J P, Yang G S. Macromol Rapid Commun, 2015, 36(22):1994～1999.
[36] Richardson N E, Meakin B J. J Pharm Pharmacol, 2011, 26(3): 166～174.
[37] Cai X X, Zhang Y L, Wu G Z. J Appl Polym Sci, 2011, 122(4):2271～2277.
[38] Suteu D, Bilba D, Dan F. J Appl Polym Sci, 2007, 105(4):1833～1843.
[39] 危伟. 尼龙11和尼龙1010粉末涂料的制备和工艺研究, 武汉: 湖北大学, 2007.
[40] 黄山贝诺科技有限公司. 中国, CN201611077708.2, 2017.
[41] Ma M, Zhu Z D, Wu B Z, Chen S, Shi Y Q, Wang X. Mater Lett, 2017, 190: 71～74.
[42] Cheval N. Nanoscale Res Lett, 2012, 7(1): 182.
[2] Yang J, Shi Y, Yan C. J Appl Polym Sci, 2010, 117(4): 2196～2204.
[3] Kim J, Creasy T S. Polym Test, 2004, 23(6): 629～636.
[4] Linares A, Canalda J C, Cagiao M E, Ezquerra T A. Compos Sci Technol, 2011, 71(10): 1348～1352.
[5] 汤教佳,蕙舒婷,张佩瑶,杨欣爽. 塑料工业,2018, 46(7): 26～31.
[6] Chen Z, Liu C S, Wang Q. Polym Eng Sci, 2001, 41(7): 1187～1195.
[7] Wang G X, Wang P L, Zhen Z C, Zhang W, Ji J H. Mater Des, 2015, 87: 656～662
[8] Wang G X, Liu P, Zhang W, Zhen Z C, Wang X W, Lu B, et al. Express Polym Lett, 2018, 12(1): 13～23.
[9] Hou W H, Lloyd T B. J Appl Polym Sci, 1992, 45(10): 1783～1788.
[10] Hou W H, Lobuglio T M. J Appl Polym Sci, 1994, 54(9): 1363～1369.
[11] 杨旭生,汪艳,陈亚武. 塑料工业, 2018, 46(3): 135～138.
[12] 彭梦飞,汪艳. 工程塑料应用, 2017, 45(3): 50～53.
[13] 谭支林,汪艳. 工程塑料应用, 2018, 46(5): 93～97.
[14] Shi Y S, Zhu W, Yan C Z, Yang J S, Xia Z D. Rapid Prototyping J, 2018, 24(6):1026～1033.
[15] Shahzad K, Deckers J, Boury S, Neirinck B, Kruth J P, Vleugels J. Cera Int, 2012, 38(2):1241～1247.
[16] Md S W, Kenny D, Bob C. J Mech Eng Autom, 2011, 2(5):100～107.
[17] Crespy D, Landfester K. Macromol Chem Phys, 2007, 208(5):457～466.
[18] Cai X X, Wu G Z. Chin J Polym Sci, 2011, 29(5):580～585.
[19] Wu G Z, Cai X X, Lin X J, Yui H. React Funct Polym, 2010, 70(10):732～737.
[20] Dan F, Cleopatra V C. J Appl Polym Sci, 1996, 13(5):67～89.
[21] Cleopatra V C, Dan F. J Appl Polym Sci, 1997, 64(13):2575～2583.
[22] Dan F, Cleopatra V C. Colloid Polym Sci, 1998, 276(6):483～495.
[23] Dan F, Cleopatra V C. J Appl Polym Sci, 1998, 67(2):231～243.
[24] Ricco L, Monticelli O, Russo S, Paglianti A, Mariani A. Macromol Chem Phys, 2002, 203(10): 1436～1444
[25] Dencheva N, Denchev Z, Lanceros-Mendez S, Ezquerra S T. Macromol Mater Eng, 2016, 301(2):119～124.
[26] Oliveira F, Dencheva N, Martins P, Lanceros-Mendez S, Denchev Z. Express Polym Lett, 2016, 10(2):160～175.
[27] Landfester D C. Macromolecules, 2005, 38(16):6882～6887.
[28] Pei A H, Liu A D, Xie T X, Yang G S. Macromolecules, 2006, 12(5):7801～7804.
[29] Wu B Z, Xie T X, Yang G S. Mater Lett, 2011, 65(14):2174～2177.
[30] Wu B Z, Xie T X, Yang G S. Polym Eng Sci, 2012, 52(9):1831～1838.
[31] Liu Y, Xie T X, Yang G S. J Mater Sci, 2011, 46(15):5050～5055.
[32] Kim I G, Kim J E, Liu Y D, Choi H J. IEEE Trans Magn, 2012, 48(11): 3446～3449.
[33] Liu Y, Duan J P, Fu X B, Yang G S. Mater Lett, 2018, 21(4):34～37.
[34] Liu Y, Duan J P, Xia H S, Xu J, Yang G S. Macromol Mater Eng, 2018, 303(5):78～83.
[35] Zhao X K, Xia H S, Fu X B, Duan J P, Yang G S. Macromol Rapid Commun, 2015, 36(22):1994～1999.
[36] Richardson N E, Meakin B J. J Pharm Pharmacol, 2011, 26(3): 166～174.
[37] Cai X X, Zhang Y L, Wu G Z. J Appl Polym Sci, 2011, 122(4):2271～2277.
[38] Suteu D, Bilba D, Dan F. J Appl Polym Sci, 2007, 105(4):1833～1843.
[39] 危伟. 尼龙11和尼龙1010粉末涂料的制备和工艺研究, 武汉: 湖北大学, 2007.
[40] 黄山贝诺科技有限公司. 中国, CN201611077708.2, 2017.
[41] Ma M, Zhu Z D, Wu B Z, Chen S, Shi Y Q, Wang X. Mater Lett, 2017, 190: 71～74.
[42] Cheval N. Nanoscale Res Lett, 2012, 7(1): 182.