连续重整压缩机入口过滤网堵塞的原因分析
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Cause Analysis of Blockage of Inlet Filter of Continuous Reforming Compressor
  • 作者:班辉
  • 英文作者:Ban Hui;CNOOC(Taizhou) Petrochemical Co.,Ltd.;
  • 关键词:铵盐 ; ; ; 堵塞
  • 英文关键词:ammonium salt;;water;;nitrogen;;Clogging
  • 中文刊名:SDHG
  • 英文刊名:Shandong Chemical Industry
  • 机构:中海油气(泰州)石化有限公司;
  • 出版日期:2019-01-23
  • 出版单位:山东化工
  • 年:2019
  • 期:v.48;No.348
  • 语种:中文;
  • 页:SDHG201902045
  • 页数:4
  • CN:02
  • ISSN:37-1212/TQ
  • 分类号:116-119
摘要
针对装置开工以来进料中水含量、氮含量长期超标,于系统内形成铵盐,造成重整压缩机入口过滤网堵塞和部分低温部位的盐类积聚。本文通过对水、氮的来源以及所形成的铵盐对装置的影响进行了全面综合的原因分析并提出了合理建议。
        Aiming at the problem that the water and nitrogen content of reforming feed have exceeded the standard for a long time since the start-up of the unit and ammonium salt has been formed in the system,resulting in blockage of the filter screen at the inlet of the reforming compressor and salt accumulation at some low temperature parts,this paper comprehensively analyzed the sources of water and nitrogen and the influence of ammonium salt formed on the unit,and put forward reasonable suggestions.
引文
[1]徐承恩.催化重整工艺与工程[M].北京:中国石化出版社,2006:807-817.
    [2]林世雄.石油炼制工程[M].3版.北京:石油工业出版社,2000:469-520.
    [3]冀琳.催化重整装置改造的技术要点及措施[J].北京:石油炼制与化工,1997(8):22-23.