长玻纤增强热塑性复合材料阻燃改性及老化性能研究进展
|
摘要
综述了近几年来长玻璃纤维(LGF)增强热塑性复合材料的发展现状,重点以聚丙烯为例,介绍了纤维含量、分布及纤维与基体之间相容性等因素对LGF增强热塑性复合材料性能的影响;重点以尼龙6为例,对LGF增强热塑性复合材料的阻燃改性及老化性能的相关研究进行了阐述。最后对未来LGF增强热塑性复合材料改性及抗老化研究的重点和方向进行了展望。
The recent development of long glass fiber(LGF) reinforced thermoplastic composites(LFT) were summarized,the effects of fiber content,distribution and compatibility between the fiber and matrix on the properties of LGF reinforced thermoplastic composites were introduced based on the polypropylene,the flame-retardant modification and aging properties of LGF reinforced thermoplastic composites were discussed taking nylon 6 for representative,and the emphases and directions of research on the modification and anti-aging of LGF reinforced thermoplastic composites were also reviewed.
The recent development of long glass fiber(LGF) reinforced thermoplastic composites(LFT) were summarized,the effects of fiber content,distribution and compatibility between the fiber and matrix on the properties of LGF reinforced thermoplastic composites were introduced based on the polypropylene,the flame-retardant modification and aging properties of LGF reinforced thermoplastic composites were discussed taking nylon 6 for representative,and the emphases and directions of research on the modification and anti-aging of LGF reinforced thermoplastic composites were also reviewed.
引文
[1]代芳,等.工程塑料应用,2014(3):109–117.Dai Fang,et al.Engieering Plastics Application,2013,42(3):109–117.
[2]Chevali V S,et al.Composites Part A:Applied Science&Manufacturing,2010,41(9):1 253–1 262.
[3]Teixeira D,et al.Materials&Design,2015,85(1):695–706.
[4]Yang Bin,et al.Journal of Reinforced Plastics and Composites,2012,31:1 103–1 112.
[5]Tan Yahui,et al.Journal of Reinforced Plastics&Composites,2015,34(21):73–82.
[6]Liu Yun,et al.Polymer Degradation&Stability,2011,96(3):363–370.
[7]Tao Zhaozeng,et al.Polymer Composites,2014,36(10):1 826–1 839.
[8]Lenfeld P,et al.Materials Science Forum,2016,862:166–173.
[9]Zhang Daohai,et al.Journal of Vinyl&Additive Technology,2016,doi:10.1002/vnl.21563.
[10]Thomason J L.Composites Part A:Applied Science&Manufacturing,2005,36(7):995–1 003.
[11]Thomason J L.Composites Part A:Applied Science&Manufacturing,2002,33(12):1 641–1 652.
[12]Zhou Dengfeng,et al.International Polymer Processing,2016,31(4):482–490.
[13]Hassan A,et al.Journal of Reinforced Plastics&Composites,2004,23(9):969–986.
[14]Thomason J L.Composites Part A:Applied Science And Manufacturing,2007,38(1):210–216.
[15]Kumar K S,et al.Journal of Reinforced Plastics&Composites,2007,26(3):239–249.
[16]Guo Jianbing,et al.Advanced Materials Research,2013,652–654:93–97.
[17]Zhang Kaizhou,et al.Journal of Macromolecular Science Part B,2014,54(3):286–294.
[18]Fu Xiang,et al.Journal of Reinforced Plastics&Composites,2009,29(6):936–949.
[19]Guo Jianbing,et al.Science and Engineering of Composite Materials,2015,22:17–23.
[20]Zhang Daohai,et al.Fibers and Polymers,2014,15(4):794–799.
[21]Chen Yinghong,et al.Polymer Degradation&Stability,2006,91(9):2 003–2 013.
[22]孔伟,等.中国塑料,2015,29(5):30–33.Kong Wei,et al.China Plastics,2015,29(5):30–33.
[23]吴超,等.工程塑料应用,2015,43(8):35–38.Wu Chao,et al.Engineering Plastics Application,2015,43(8):35–38.
[24]田敏,等.工程塑料应用,2015,43(7):15–19.Tian Min,et al.Engineering Plastics Application,2015,43(7):15–19.
[25]Liu Yun,et al.Polymer Degradation&Stability,2011,96(3):363–370.
[26]罗兴,等.塑料工业,2013,41(8):31–34.Luo Xing,et al.China Plastics Industry,2013,41(8):31–34.
[27]Luo Xing,et al.Advanced Materials Research,2013,750–752:85–89.
[28]Bergeret A,et al.Polymer Degradation&Stability,2009,94(9):1 315–1 324.
[29]He Weidi,et al.Rsc Advances,2016,6(43):36 689–36 697.
[30]Zuo Xiaoling,et al.Journal of Applied Polymer Science,2014,131(3):1 023–1 031.
[31]Zuo Xiaoling,et al.Polymer Degradation&Stability,2013,98(12):2 774–2 783.
[2]Chevali V S,et al.Composites Part A:Applied Science&Manufacturing,2010,41(9):1 253–1 262.
[3]Teixeira D,et al.Materials&Design,2015,85(1):695–706.
[4]Yang Bin,et al.Journal of Reinforced Plastics and Composites,2012,31:1 103–1 112.
[5]Tan Yahui,et al.Journal of Reinforced Plastics&Composites,2015,34(21):73–82.
[6]Liu Yun,et al.Polymer Degradation&Stability,2011,96(3):363–370.
[7]Tao Zhaozeng,et al.Polymer Composites,2014,36(10):1 826–1 839.
[8]Lenfeld P,et al.Materials Science Forum,2016,862:166–173.
[9]Zhang Daohai,et al.Journal of Vinyl&Additive Technology,2016,doi:10.1002/vnl.21563.
[10]Thomason J L.Composites Part A:Applied Science&Manufacturing,2005,36(7):995–1 003.
[11]Thomason J L.Composites Part A:Applied Science&Manufacturing,2002,33(12):1 641–1 652.
[12]Zhou Dengfeng,et al.International Polymer Processing,2016,31(4):482–490.
[13]Hassan A,et al.Journal of Reinforced Plastics&Composites,2004,23(9):969–986.
[14]Thomason J L.Composites Part A:Applied Science And Manufacturing,2007,38(1):210–216.
[15]Kumar K S,et al.Journal of Reinforced Plastics&Composites,2007,26(3):239–249.
[16]Guo Jianbing,et al.Advanced Materials Research,2013,652–654:93–97.
[17]Zhang Kaizhou,et al.Journal of Macromolecular Science Part B,2014,54(3):286–294.
[18]Fu Xiang,et al.Journal of Reinforced Plastics&Composites,2009,29(6):936–949.
[19]Guo Jianbing,et al.Science and Engineering of Composite Materials,2015,22:17–23.
[20]Zhang Daohai,et al.Fibers and Polymers,2014,15(4):794–799.
[21]Chen Yinghong,et al.Polymer Degradation&Stability,2006,91(9):2 003–2 013.
[22]孔伟,等.中国塑料,2015,29(5):30–33.Kong Wei,et al.China Plastics,2015,29(5):30–33.
[23]吴超,等.工程塑料应用,2015,43(8):35–38.Wu Chao,et al.Engineering Plastics Application,2015,43(8):35–38.
[24]田敏,等.工程塑料应用,2015,43(7):15–19.Tian Min,et al.Engineering Plastics Application,2015,43(7):15–19.
[25]Liu Yun,et al.Polymer Degradation&Stability,2011,96(3):363–370.
[26]罗兴,等.塑料工业,2013,41(8):31–34.Luo Xing,et al.China Plastics Industry,2013,41(8):31–34.
[27]Luo Xing,et al.Advanced Materials Research,2013,750–752:85–89.
[28]Bergeret A,et al.Polymer Degradation&Stability,2009,94(9):1 315–1 324.
[29]He Weidi,et al.Rsc Advances,2016,6(43):36 689–36 697.
[30]Zuo Xiaoling,et al.Journal of Applied Polymer Science,2014,131(3):1 023–1 031.
[31]Zuo Xiaoling,et al.Polymer Degradation&Stability,2013,98(12):2 774–2 783.