基于虚拟样机技术的矿井提升机制动特性研究
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Research on braking characteristics of mine hoist based on Virtual Prototyping Technology
  • 作者:靖伟卿
  • 英文作者:JING Weiqing;Datong Coal Mine Group Co., Ltd.;
  • 关键词:虚拟样机技术 ; 矿井提升机 ; 制动 ; 钢丝绳张力 ; RecurDyn
  • 英文关键词:virtual prototyping technology;;mine Hoist;;braking;;wire rope tension;;RecurDyn
  • 中文刊名:MKXD
  • 英文刊名:Coal Mine Modernization
  • 机构:大同煤矿集团有限责任公司大斗沟煤业公司;
  • 出版日期:2019-02-18
  • 出版单位:煤矿现代化
  • 年:2019
  • 期:No.149
  • 语种:中文;
  • 页:MKXD201902098
  • 页数:3
  • CN:02
  • ISSN:37-1205/TD
  • 分类号:91-92+96
摘要
针对矿井提升机制动过程中的钢丝绳张力变化大的特点,本文基于虚拟样机技术,运用RecurDyn多体动力学仿真软件建立了提升机虚拟样机模型;基于此模型研究了重载提升工况和重载下放工况制动过程中钢丝绳张力变化规律,结果表明:重载下放工况制动过程中钢丝绳张力大于重载提升工况下钢丝绳张力。
        In view of the large variation of the tension of wire rope during the braking process of mine hoist, a virtual prototype model of hoist is built used the software of RecurDyn based on virtual prototyping technology. Based on this model, the change law of wire rope tension during the working condition of heavy load lifting and heavy load is researched. The results show that the wire rope tension of heavy load down condition is greater than the tension under heavy load lifting during the braking process.
引文
[1]王平,肖兴明,丁保华,等.矿井提升钢丝绳在提升过程中的动力学仿真[J].起重运输机械, 2009, 2009(7):84-87.
    [2]王琦.矿井提升钢丝绳动力学仿真与实验研究[J].煤矿机电, 2013(6):28-31.
    [3]刘秋军.矿井提升钢丝绳动力学仿真分析[J].煤矿机械,2014, 35(10):73-76.
    [4]李菁,李济顺,刘义,等.虚拟样机技术在摩擦式提升机动力学分析中应用[J].机械设计与制造, 2014(9):238-241.
    [5]李菁.摩擦式矿井提升机动力学仿真及实验研究[D].河南科技大学, 2014.